To move the carriage into the shipping position

1. Remove drum and return carriage release lever to the up position.
2. With the scanner turned on and in the READY TO SCAN mode, press ENTER. The LCD should read – OFFLINE.
3. Press the left arrow button. The LCD should read TEST.
4. Press ENTER. The LCD should read CABLE CHECK.
5. Press the right arrow button. The LCD should read CARRIAGE.
6. Press ENTER. The LCD should read CARRIAGE: HOME POSITION.
7. Press the left arrow button. The LCD should read CARRIAGE: SHIP POSITION.
8. Press ENTER to move the carriage into the ship position.
9. Turn off the scanner.
<< click here >> for visual intructions
packing the contents
<< Returning your scanner for repair >>